Re: Mounting Turbo Action Shifter
I have a Hurst 1/4 stick but made my floor bracket from a piece of channel iron about 2" wide and 1/2" tall, maybe 1/8" thick. (My local Home Depot sells lengths of it. Drilled it to match the shifter mounting pattern and bolted it together with short 1/4" bolts.Nuts were then welded underneath to stay in place when shifter is removed. Then the channel piece was welded to the floor/tunnel in a comfortable location.
__________________
LOCOMOTION Racing
Last edited by Myron Piatek; 04-27-2018 at 11:50 AM.
|