Quote:
Originally Posted by Bill Harris
Your picture of the cal-tracks show that you might be violating a rule from the "Traction Bars" section of the stock rules. There is a line that says "Traction bars and/or mounting brackets (to rear axle housing) may not be lower than lowest edge of rear-wheel rim". It might be the perspective of the picture, but it looks like the bottom of the cal-track bar mount and heim extend below the bottom of the wheel. I was warned about this myself a number of years ago on my car by a tech guy and allowed to run but "fix it by next time". It was because of spacers that I had used between the axle perch and spring to adjust the ride height. Probably no one will pay any attention these days, but you never know!
Great build thread.
|
Thank you Bill, it certainly does look as if the lower bracket is indeed below the wheel itself. There's a spacer and a wedge plate under the axle, I could remove the spacer and that would probably rectify the issue. I'll have a good look at it when i'm down there next time.