Quote:
Originally Posted by Rich Biebel
It was definitely from a lack of oil issue....
Bad pump, restriction of oil flow or pressure/volume
Small blocks are pretty trouble free generally in this area.
A small Plug down inside a passage under the rear cap....front and rear cam plugs.....cam bearings...…things to check...
If the crank was ground it is a MUST to run a brush thru all the oil holes....and wash it real good...….
Seen guys take a fresh ground crank out of the box and just install it.
Over full oil pan could have caused the oil to aerate from windage.....but that's a stretch.....
|
Not really a stretch when putting 1 quart over.What size oil filter? Pickup to pan should be a max of 3/8".