CLASS RACER FORUM - View Single Post - Solid and Hydraulic lifters on a stocker.

Jeff Stout · 06-18-2019, 12:39 PM

On my Olds motor solid lifters are not available. I converted mine over to a solid style. I run .004/.005 lash hot. If I did it again I know now what my total is and would increase lift on cam profile as about .010 short on max lift. I would be scared to run zero lash hot as things grow at different temperatures and would possibly not allow valve to seat. No gospel just my .02

06-18-2019, 12:39 PM	#3
Jeff Stout VIP Member Join Date: Dec 2001 Location: phoenix Posts: 1,486 Likes: 66 Liked 704 Times in 281 Posts	Re: Solid and Hydraulic lifters on a stocker. On my Olds motor solid lifters are not available. I converted mine over to a solid style. I run .004/.005 lash hot. If I did it again I know now what my total is and would increase lift on cam profile as about .010 short on max lift. I would be scared to run zero lash hot as things grow at different temperatures and would possibly not allow valve to seat. No gospel just my .02 Last edited by Jeff Stout; 06-18-2019 at 12:42 PM. Reason: more