CLASS RACER FORUM - View Single Post

Rich Biebel · 04-21-2020, 01:56 PM

I could not really estimate what that would cost without taking a look but it has to be removed and covers removed to do any kind of work....

The removal and replacement of one in a diesel pusher is a difficult process....I've done many over the years. On a Toter it's usually not so bad.....compartment mounted somewhere on the side...usually

It would not be hard to get to $2 grand or more...I generally do a complete service and change some parts known to fail while I'm in there.

The flex pipe coming off the engine breaks on those.

The flex pipe alone is well over $200...

External pipes are usually custom made or made from Onan pipes readily available.....

04-21-2020, 01:56 PM	#3
Rich Biebel VIP Member Join Date: Jun 2007 Location: Northern New Jersey suburbs Posts: 2,314 Likes: 25 Liked 544 Times in 213 Posts	Re: Onan Generator part needed I could not really estimate what that would cost without taking a look but it has to be removed and covers removed to do any kind of work.... The removal and replacement of one in a diesel pusher is a difficult process....I've done many over the years. On a Toter it's usually not so bad.....compartment mounted somewhere on the side...usually It would not be hard to get to $2 grand or more...I generally do a complete service and change some parts known to fail while I'm in there. The flex pipe coming off the engine breaks on those. The flex pipe alone is well over $200... External pipes are usually custom made or made from Onan pipes readily available..... __________________ Rich Biebel S/C 1479 Stock 147R Last edited by Rich Biebel; 04-21-2020 at 01:59 PM.