02-07-2021, 10:16 AM
|
#27
|
VIP Member
Join Date: Nov 2002
Location: Massapequa Park,NY
Posts: 1,212
Likes: 1,744
Liked 825 Times in 267 Posts
|
Re: I'm going to build a smooth idle 427 and drag test it
Quote:
Originally Posted by HP HUNTER
Thanks, I didn't pull it lower than 3500, I knew I'd never see that on the track, I doubt there was more TQ below 3500. I can tell you from driving the car off idle TQ is very good, but as you know theres always a trade off-and I'm sure it going to be on the top. But it sure runs good, just wonder what it could have made if I really got after it, intake work, oil pan work, lightened the bottom end up, 1.8 intake rocker, more compression. Vacuum was 15 inches @ 750 RPM @ 6400 feet altitude. Heres a video.
|
There is more torque at lower rpm. Look where the tq is at 3500 rpm. Your correct and probably never see it at the track.
__________________
1989 Camaro Iroc-Z I/SA B&B Auto Machine Shop.
|
|
|