CLASS RACER FORUM - View Single Post

Painter · 04-05-2021, 06:31 PM

Ok- there are three advantages of running a slave solinoid on a go.

1- Does away with small wire going down to starter that can burn against header
2- Keeps voltage off of the battery cable going from slave to lower solenoid.
3- most importantly the solenoid on the starter works much better with full voltage provided by a 10 gauge jumper from battery post to start terminal overcomming heat related issues.

04-05-2021, 06:31 PM	#5
Painter Member Join Date: Dec 2012 Posts: 227 Likes: 4 Liked 162 Times in 45 Posts	Re: Starter heat shield Ok- there are three advantages of running a slave solinoid on a go. 1- Does away with small wire going down to starter that can burn against header 2- Keeps voltage off of the battery cable going from slave to lower solenoid. 3- most importantly the solenoid on the starter works much better with full voltage provided by a 10 gauge jumper from battery post to start terminal overcomming heat related issues.