CLASS RACER FORUM - View Single Post

Eman · 05-03-2021, 12:46 AM

GM trucks with a 5.7L motor used a metal shim between the engine block and the mount. This might work to get clearance if the bolt pattern is the same for a BBC. I've also use Speedway circle track motor mounts as a shim. Moroso made short and long solid mounts for some vehicles. I have the sam problem on my Camaro and can't use a pan with the deeper frt. section.

05-03-2021, 12:46 AM	#4
Eman Member Join Date: May 2014 Location: E TN Posts: 468 Likes: 16 Liked 133 Times in 76 Posts	Re: Chevelle Steering Linkgage hits oil pan GM trucks with a 5.7L motor used a metal shim between the engine block and the mount. This might work to get clearance if the bolt pattern is the same for a BBC. I've also use Speedway circle track motor mounts as a shim. Moroso made short and long solid mounts for some vehicles. I have the sam problem on my Camaro and can't use a pan with the deeper frt. section.