View Single Post
Old 06-12-2024, 04:57 PM   #3
Cglrcng
Member
 
Cglrcng's Avatar
 
Join Date: Aug 2023
Location: Kingman, AZ
Posts: 406
Likes: 1,516
Liked 332 Times in 184 Posts
Default Re: A 30 year journey, and a 2nd chance.

(Since last races in april; Changed 02 sensor, added beam breaker)

June 8th & 9th Summit Bracket Racing Las Vegas, NV 109 degree plus weather (Super Sunny and junk air) Saturday -.007 Red TT1, -.005 Red TT2, .024 E1 Win 17.75 Dial/17.784 to a .121 12.92 Dial 12.910 B.O., .018 E2 Win 17.75 Dial/17.742 to a .100 14.38 Dial 14.275 B.O., -.014 Red E3 Loss 17.74 Dial/17.836 to a -.065 11.83 Dial 11.913.

After the 3rd rnd loss Saturday changed the fuel pressure regulator to a new adjustable regulator, attempted to adjust the pressure downward from 42 psi to attempt to lean it out a bit, but the minimum adjustment ended up raising the pressure to 50 psi. (Left the new regulator on the car).

Sunday (Temp and corrected altitude even higher.)
Had Coffee in the morning and knew 1st TT was going to be deep red and it was -.051 RedTT1, 17.618 (a 10th and a half plus quicker than TT1 Saturday, so the ECM is adjusting properly, more fuel pressure), in TT2 I made a bunch of biological and car adjustments that did not pan out (I did too many at once) Ate food, lowered front WD Slicks a full psi, and beyond and it showed .118 TT2 17.653, Adjusted w/ low caffeine dose via half a pepsi, and put the front tire adj. back up 1 psi .042 E1 Win 17.66 dial 17.623 double breakout, against .113 12.45 dial/12.410 B.O. (MOV .0031), then ran into Paul Wong E3 and a weekend ending Red Light knowing it was going to be a tree chopper -.036 Red 17.64 Dial 17.634 Loss against his .018 12.16 Dial and 1 under 12.150 (So I needed to hit hard and went waaaay too far! Car was dialed right my 6 thou too quick against his 10 thou too quick was right there together, driver just wound too tight.

On to start bigger and better things, and finally start to make this car finally tuneable! Car is still in storage in Las Vegas until all the parts and pcs are in and ready to put on the car, but the Holley Terminator X ECU, Main Power Cable are in already, and made up a pr. of electronics mounting boards (1 for me and 1 for a friend in Texas (Greg Hogue), who is building a Stk.1984 2.2L Daytona Turbo Edition).Click image for larger version

Name:	20240514_162550.jpg
Views:	1799
Size:	87.2 KB
ID:	70148

Click image for larger version

Name:	20240514_162744.jpg
Views:	1796
Size:	89.7 KB
ID:	70149

Click image for larger version

Name:	20240610_193914.jpg
Views:	1780
Size:	128.6 KB
ID:	70150

Click image for larger version

Name:	20240610_194136.jpg
Views:	1791
Size:	114.2 KB
ID:	70151

Click image for larger version

Name:	20240603_133343.jpg
Views:	1797
Size:	127.9 KB
ID:	70152

Click image for larger version

Name:	20240607_140506.jpg
Views:	1775
Size:	133.9 KB
ID:	70153

Click image for larger version

Name:	20240607_140520.jpg
Views:	1842
Size:	142.8 KB
ID:	70154

Click image for larger version

Name:	20240607_145619.jpg
Views:	1831
Size:	104.2 KB
ID:	70155

Click image for larger version

Name:	20240607_150338.jpg
Views:	1798
Size:	113.2 KB
ID:	70156
__________________
Gary Lucier - 7832 STK. / 7832 E.T. EF/S Slow Sled. I am, but a simple test of your true patience. So, do all the really "Big Wheelies" you can!
Cglrcng is offline   Reply With Quote
Liked