Quote:
Originally Posted by Woodro Josey
Robert we machined a 2" hole in the side of it and made a plate of 1/4" Aluminum big enough to cover the hole and drilled a couple of mounting holes in it with matching holes in the pan. then Installed bolts thru from the inside and welded them to the pan, that way when using the inspection cover you don't have to worry about them backing out. As for sealing, i just used a good silicone between the pan and plate, no leaks!
|
Thanks Woodro. That's similar to what I was thinking of. Actually, IF, I did this, I was going to make a gasket to seal the plate. I was thinking welded nuts to the inside of the pan. From the sound of things, I won't need to do this after all.
Robert Swartz