CLASS RACER FORUM - View Single Post

Rich Biebel · 12-10-2008, 08:47 AM

I built a 405 cube engine using a set of Brodix raised runner/spread port-10's that were WeldTech ported. That engine was very strong. I built a similar sized engine years later using -12's with very large intake runners. It never ran up to expectations. I have an engine in my garage now that is a pretty strong running 400 and it has ProAction 220 aluminum heads on it. I also built a 375 cube engine using AFR 220's and ported them myself. That engine ran 9.00 at 150 in an early Camaro with a Ron's toilet. That car was pretty light......

12-10-2008, 08:47 AM	#9
Rich Biebel VIP Member Join Date: Jun 2007 Location: Northern New Jersey suburbs Posts: 2,320 Likes: 25 Liked 553 Times in 216 Posts	Re: Brodix 18X heads??? I built a 405 cube engine using a set of Brodix raised runner/spread port-10's that were WeldTech ported. That engine was very strong. I built a similar sized engine years later using -12's with very large intake runners. It never ran up to expectations. I have an engine in my garage now that is a pretty strong running 400 and it has ProAction 220 aluminum heads on it. I also built a 375 cube engine using AFR 220's and ported them myself. That engine ran 9.00 at 150 in an early Camaro with a Ron's toilet. That car was pretty light...... __________________ Rich Biebel S/C 1479 Stock 147R Last edited by Rich Biebel; 12-10-2008 at 08:50 AM.