CLASS RACER FORUM - View Single Post

sst3447 · 12-12-2008, 09:24 AM

I have a 434 with a set of Brodix 18c heads that are cnc machined and they are spreadport, titanium valves and t&d shaft rockers, 704 lift cam 14-1 compression with a 1050 carb with a dart block . It made 757 hp @ 7000rpm ,on the stop it goes 10.90 @140 in a 2950 lb car it was a big improvement over my 23 degree heads i had before when it went 10.90 @ 130with the same cubic inches was told i was undercamed my the machine shop it needs about 800 lift and would be over 800hp if i would change it but this combo is very consistant i would recommend Brodix and 18 degree heads to anyone that asks

12-12-2008, 09:24 AM	#18
sst3447 Junior Member Join Date: Apr 2003 Location: erie ill Posts: 69 Likes: 0 Liked 0 Times in 0 Posts	Re: Brodix 18X heads??? I have a 434 with a set of Brodix 18c heads that are cnc machined and they are spreadport, titanium valves and t&d shaft rockers, 704 lift cam 14-1 compression with a 1050 carb with a dart block . It made 757 hp @ 7000rpm ,on the stop it goes 10.90 @140 in a 2950 lb car it was a big improvement over my 23 degree heads i had before when it went 10.90 @ 130with the same cubic inches was told i was undercamed my the machine shop it needs about 800 lift and would be over 800hp if i would change it but this combo is very consistant i would recommend Brodix and 18 degree heads to anyone that asks