CLASS RACER FORUM - View Single Post

buzzinhalfdozen · 01-09-2009, 05:32 PM

A.R.T. makes a good sprung tubular bar, I've put them on several hard leaving ladder bar cars with very good results. As i said you can make these "solid" if you desire, which I haven't had to do yet on any that I've set up, I believe the spring feature gives you more control at least in "slowing" the rise rate. Joe Forgot to mention I'd go with the longest bar that is feasible to use, Longer bars are less violent. Good luck!

01-09-2009, 05:32 PM	#8
buzzinhalfdozen Senior Member Join Date: Sep 2006 Location: Bellevue Ohio Posts: 984 Likes: 0 Liked 11 Times in 8 Posts	Re: sprung or unsprung wheelie bars A.R.T. makes a good sprung tubular bar, I've put them on several hard leaving ladder bar cars with very good results. As i said you can make these "solid" if you desire, which I haven't had to do yet on any that I've set up, I believe the spring feature gives you more control at least in "slowing" the rise rate. Joe Forgot to mention I'd go with the longest bar that is feasible to use, Longer bars are less violent. Good luck! __________________ Joe Buchanan SS/BX 3117 Last edited by buzzinhalfdozen; 01-09-2009 at 05:36 PM.