CLASS RACER FORUM - View Single Post

Mike Taylor 3601 · 02-09-2016, 10:38 AM

Thanks Carl.
I had about same experience with world block,sold one wollered(KY word?)a lifter bore out in about ten runs, when put fixture on the rest of those bore were way of,in or ex,cant remember had to bush them to fix, which ever it was in. or ex. the other was fine,but bushed them anyway,figured the bronze would be better than the iron.

If I get to the point of CNC,I will being doing a lot of research.

Mike Taylor 3601

02-09-2016, 10:38 AM	#27
Mike Taylor 3601 VIP Member Join Date: Oct 2008 Location: Somerset,Ky Posts: 1,303 Likes: 198 Liked 116 Times in 48 Posts	Re: Questions on lifter bore correction Thanks Carl. I had about same experience with world block,sold one wollered(KY word?)a lifter bore out in about ten runs, when put fixture on the rest of those bore were way of,in or ex,cant remember had to bush them to fix, which ever it was in. or ex. the other was fine,but bushed them anyway,figured the bronze would be better than the iron. If I get to the point of CNC,I will being doing a lot of research. Mike Taylor 3601