CLASS RACER FORUM - View Single Post

MikeMoller · 11-05-2020, 10:37 AM

with the converter unbolted and pushed into the trans until it is bottomed out, you need 1/8 inch (.125) space between converter mounts and flexplate. In other words, converter mounted up needs 1/8 (.125) from being bottomed out in the trans.

11-05-2020, 10:37 AM	#8
MikeMoller Senior Member Join Date: May 2010 Location: Raleigh NC Posts: 626 Likes: 27 Liked 242 Times in 72 Posts	Re: 200 metric issue with the converter unbolted and pushed into the trans until it is bottomed out, you need 1/8 inch (.125) space between converter mounts and flexplate. In other words, converter mounted up needs 1/8 (.125) from being bottomed out in the trans. __________________ Mike Moller NHRA 203 Q-R-T/SA Last edited by MikeMoller; 11-05-2020 at 10:40 AM.