[Rich Biebel]

A 9375 is a good 1050 to look for and try.....They run well and jetting should be 92's as a baseline. Anywhere from 88 to 94 is a normal jetting range on those. Holley's generally do the Holley "gurggle" and it is pretty normal.....If it holds a steady rpm without sinking it is ok....If it loses rpm after it runs a while and goes back up after you rev it a few times...it's too rich...fixing that is not always just a matter of an adjustment.......Too big a carb or cam or both often slows a car down......