View Single Post
Old 06-24-2016, 05:22 PM   #16
Lenny5160
Senior Member
 
Lenny5160's Avatar
 
Join Date: Nov 2015
Location: Inver Grove Heights, MN
Posts: 898
Likes: 604
Liked 432 Times in 225 Posts
Default Re: How do i get a radial slick to hook on a marginal track

I wouldn't run a bias slick if they paid me to.

I run Hoosier 9" radials on a 10" wheel. Burnout is extremely minimal. I do not use a line lock. Low gear just to get them spinning, then shift to high.

Weight in the trunk is definitely good. I think I have a couple hundred pounds back there.

I run 17 psi but, honestly, it is only for even wear with my combo. I've been from 16 - 26 and have never seen a difference in performance. Half the time I don't even check them once I've made a couple passes.

It did take some work initially once I got some decent HP. You'll want to make sure the front end moves freely.

I've never counted passes, but I'm sure I get 150 on the Hoosier C07 tire.

Stick with them and you will be better for it! I love hearing others complain about a tricky track. As long as I don't go up in smoke, I know my 60' time will be within .01 of the previous run.
__________________
S/ST 51
S/C 53
Lenny5160 is offline   Reply With Quote