CLASS RACER FORUM - View Single Post

gnicholson · 10-22-2015, 12:17 AM

First off the race pack and tach may be off compared to each other. Also the car is loaded differently against the trans brake than it is going down track. I only use the playback on the tach to check my cruise rpm after a run. If its 100rpm low I will unplug the stop and run it against the brake like you and note the rpm . I then make an adjustment and recheck untill its 100rpm higher . In other words I just use the brake rpm as a reference in order to set the rpm to what I want based on the playback of the last run. Also you only use one instrument this way

10-22-2015, 12:17 AM	#2
gnicholson Member Join Date: Sep 2011 Posts: 100 Likes: 13 Liked 4 Times in 3 Posts	Re: Throttle Stop RPM Check First off the race pack and tach may be off compared to each other. Also the car is loaded differently against the trans brake than it is going down track. I only use the playback on the tach to check my cruise rpm after a run. If its 100rpm low I will unplug the stop and run it against the brake like you and note the rpm . I then make an adjustment and recheck untill its 100rpm higher . In other words I just use the brake rpm as a reference in order to set the rpm to what I want based on the playback of the last run. Also you only use one instrument this way