CLASS RACER FORUM - View Single Post

jamie2370 · 10-31-2020, 05:40 PM

I did not measure anything before I unstacked it. Assumed with steel in the pan it was gonna be bad. Anchor pin is good. Going with a Sepanek manual valve body. Its going to my trans guy now. Next question. Should you have to put 3 washers(stacked together) between the converter and flexplate? Thats how it was when I got it. I'm guessing mabye 1/8" worth of shim. I feel it is really close to being bottomed out in pump.

10-31-2020, 05:40 PM	#5
jamie2370 Member Join Date: Dec 2014 Location: Perry, GA Posts: 329 Likes: 11 Liked 236 Times in 89 Posts	Re: 200 metric issue I did not measure anything before I unstacked it. Assumed with steel in the pan it was gonna be bad. Anchor pin is good. Going with a Sepanek manual valve body. Its going to my trans guy now. Next question. Should you have to put 3 washers(stacked together) between the converter and flexplate? Thats how it was when I got it. I'm guessing mabye 1/8" worth of shim. I feel it is really close to being bottomed out in pump.