CLASS RACER FORUM - View Single Post

dmir55 · 05-28-2016, 09:52 PM

Use a 1/4 32 NEF tap to 'fix' the threads for the jets. If you don't have much room under the jet, use a bottoming tap. Or you can grind the end of the tap flat. Than you can use Holley jets. I have done this on several carbs and haven't had problems. If you have metering rods just leave then out. Good luck and happy motoring.

05-28-2016, 09:52 PM	#6
dmir55 Junior Member Join Date: Jul 2014 Location: northern Minnesota Posts: 64 Likes: 0 Liked 0 Times in 0 Posts	Re: Mopar 2 bbl jets Use a 1/4 32 NEF tap to 'fix' the threads for the jets. If you don't have much room under the jet, use a bottoming tap. Or you can grind the end of the tap flat. Than you can use Holley jets. I have done this on several carbs and haven't had problems. If you have metering rods just leave then out. Good luck and happy motoring.