CLASS RACER FORUM - View Single Post - M-200 torque converter installation

Lou Jeffery · 06-18-2016, 07:44 AM

Bobby, I think you are not engaged with the pump drive yet. I measured a stock 200 with converter and mount pads are 1.125 inches behind the mounting surface. The pump drive, The two square notches on the neck of the converter are the last part to engage. Hope this helps. Louis Jeffery

06-18-2016, 07:44 AM	#2
Lou Jeffery Junior Member Join Date: Nov 2013 Posts: 91 Likes: 0 Liked 0 Times in 0 Posts	Re: M-200 torque converter installation Bobby, I think you are not engaged with the pump drive yet. I measured a stock 200 with converter and mount pads are 1.125 inches behind the mounting surface. The pump drive, The two square notches on the neck of the converter are the last part to engage. Hope this helps. Louis Jeffery