|
06-06-2024, 05:56 AM | #12 |
Member
Join Date: Oct 2020
Posts: 262
Likes: 3,617
Liked 512 Times in 173 Posts
|
Re: Ryan Competition Carburetors
Good morning to all,
The biggest problem facing us today is getting good usable core and parts. Those carbs were pretty good, but never received the support from Carter. We used to get the "Track Packs" Chrysler and one of the Direct Connection books and go from there. One problem I found was during service they were exposed to high heat and the Center Sections would warp and even found a few fuel passages shut down. These were mostly street carbs , the racer carbs usually survived much better. I still feel that it was a good carb, but misunderstood by most ( including myself ). Now fast forwarding to today I'd tackel them again, but I'd probably need to molest one or two to see what parts will need to be made or repurposed. Not trying to HiJack your thread, but the parts problem is universal at this time. Have a Good Day. Respectfully, Henry Kunz 1534 H/SA |
Liked |
06-06-2024, 02:14 PM | #13 |
Member
Join Date: Jun 2007
Posts: 385
Likes: 644
Liked 442 Times in 100 Posts
|
Re: Ryan Competition Carburetors
This brings me to something I've wondered about for a long time. I was racing a 70 340 Duster with the metal AVS. Shortly thereafter (the next year?) Mopar moved to the Thermoquad, and the main point I got from it was rejecting heat better than a metal casting. Looking back, the whole thing might have just been marketing speak because the change was in order to reduce costs.
Anyone have any idea if the phenolic body actually did anything? It didn't seem as if the cars that were using them were any quicker. And also, nobody I remember followed their lead. |
Liked |
06-07-2024, 06:09 AM | #14 | |
Member
Join Date: Oct 2020
Posts: 262
Likes: 3,617
Liked 512 Times in 173 Posts
|
Re: Ryan Competition Carburetors
Quote:
Those are all great points, and I now wonder if Carter was trying (at the time) to find an improvement in keeping the fuel in the fuel bowls cooler. Using the Phenolic was a way for Carter to reduce the temps and have a ridged material that could stand up to heat cycling of a passenger car engine. Its too bad most of us working on those parts at the time weren't issued a warning on how to properly tighten those carbs with a torque wrench. Like the Q-Jet at the time most were over tightened and crushed. Just some of what I have observed over the last 45 years. Have a Good Day. Respectfully, Henry Kunz 1534 H/SA |
|
Liked |
|
|