|
|
|
|
08-30-2014, 09:51 AM
|
#1 |
|
Junior Member
Join Date: Jun 2009
Location: San Antonio, Texas
Posts: 32
Likes: 0
Liked 0 Times in 0 Posts
|
Torque Converter
Just installed a new converter. Went to stall the converter and went to 3000 then to 5500. I've never seen one do that. Converter guys please help.
|
|
|
|
08-30-2014, 10:25 AM
|
#2 |
|
Veteran Member
Join Date: May 2006
Location: Murfreesboro TN
Posts: 5,116
Likes: 1,573
Liked 1,830 Times in 415 Posts
|
Re: Torque Converter
Are you doing a static "stall test", where you hold the brakes, mat the accelerator pedal, see how high the tach goes, and then release the accelerator pedal?
__________________
Alan Roehrich 212A G/S |
|
|
|
|
08-30-2014, 10:34 AM
|
#3 |
|
Junior Member
Join Date: Jun 2009
Location: San Antonio, Texas
Posts: 32
Likes: 0
Liked 0 Times in 0 Posts
|
Re: Torque Converter
No on the transbrake.
|
|
|
|
|
08-30-2014, 10:56 AM
|
#4 |
|
Veteran Member
Join Date: May 2006
Location: Murfreesboro TN
Posts: 5,116
Likes: 1,573
Liked 1,830 Times in 415 Posts
|
Re: Torque Converter
Just as bad.
If you cannot fully release the car with your foot on the throttle, never do that, ever. It drives the stored energy right back into the sprag and the stator. That said, your problem could be anything, from a converter problem to a mismatch, to an ignition problem.
__________________
Alan Roehrich 212A G/S |
|
|
|
|
08-30-2014, 01:22 PM
|
#5 |
|
Veteran Member
Join Date: Mar 2002
Location: Miles From Nowhere
Posts: 7,817
Likes: 2,907
Liked 5,124 Times in 1,953 Posts
|
Re: Torque Converter
Need more info
__________________
"We are lucky we don't get as much Government as we pay for." Will Rogers |
|
|
|
08-30-2014, 01:39 PM
|
#6 |
|
Junior Member
Join Date: Jun 2009
Location: San Antonio, Texas
Posts: 32
Likes: 0
Liked 0 Times in 0 Posts
|
Re: Torque Converter
Mark,
Tell me what you need i'll try to answer as much as I can. |
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
