|
09-17-2018, 12:18 AM | #1 |
VIP Member
Join Date: Oct 2007
Posts: 1,152
Likes: 452
Liked 322 Times in 118 Posts
|
plastic printing
i was watching a video on plastic printing. Ha anyone used one of these tro make light weight brackets or other parts?
|
09-17-2018, 09:54 AM | #2 | |
VIP Member
Join Date: Feb 2003
Location: Glendale, Arizona
Posts: 2,998
Likes: 693
Liked 1,469 Times in 549 Posts
|
Re: plastic printing
Quote:
You must be talking about 3D printing. There are already a few parts out there, including intake manifolds that have been manufactured from Nylon. There are also printers that will create metal parts from powered metal. |
|
09-17-2018, 11:02 AM | #3 |
VIP Member
Join Date: Feb 2014
Location: Lakewood Washington
Posts: 1,407
Likes: 29
Liked 237 Times in 127 Posts
|
Re: plastic printing
The trick with 3D printing of custom parts is that they need to be designed in CAD files. That requires fairly expensive software and a good deal of skill to prepare the file to feed the printer. Couple of grand to set this up for a bracket lighter but not as strong as 6061 aluminum. I'd much rather have a mill and lathe.
__________________
Dale Shearon 68 Mustang 6394 |
09-17-2018, 12:45 PM | #4 | |
VIP Member
Join Date: Oct 2007
Posts: 1,152
Likes: 452
Liked 322 Times in 118 Posts
|
Re: plastic printing
Quote:
|
|
09-17-2018, 12:54 PM | #5 |
Member
Join Date: Sep 2008
Posts: 132
Likes: 3
Liked 103 Times in 35 Posts
|
Re: plastic printing
We have one and have been making quite a few parts with it. It is perfect for setup and/or temporary parts. We have made quite a few sets of runners for our comp car this year, we have even been running the runners down the track all year. Much cheaper than the billet aluminum runners we had made before...
That being said, you do need to be able to draw the part up, but that merely takes the program and some practice |
09-17-2018, 01:15 PM | #6 |
Junior Member
Join Date: May 2009
Location: Brookings. SD
Posts: 66
Likes: 450
Liked 24 Times in 12 Posts
|
Re: plastic printing
We have 5 of them at work and they can make about anything you want but like said, someone needs to draw them up for you first. Ultem is one of the stronger materials you can get for that but its not as strong as aluminum.
|
09-17-2018, 05:05 PM | #7 | |
VIP Member
Join Date: Oct 2007
Posts: 1,152
Likes: 452
Liked 322 Times in 118 Posts
|
Re: plastic printing
Quote:
can you tell me what printers you are using? Thanks |
|
09-17-2018, 06:18 PM | #8 |
VIP Member
Join Date: Nov 2001
Location: Florida
Posts: 1,541
Likes: 34
Liked 137 Times in 51 Posts
|
Re: plastic printing
I couldn't help but wonder if there is a compatible material that could be used in 3D printing to make replacement Thermoquad fuel bowls.
__________________
LOCOMOTION Racing |
09-17-2018, 06:24 PM | #9 |
VIP Member
Join Date: Oct 2007
Posts: 1,152
Likes: 452
Liked 322 Times in 118 Posts
|
Re: plastic printing
|
09-17-2018, 06:31 PM | #10 | |
VIP Member
Join Date: Nov 2001
Location: Florida
Posts: 1,541
Likes: 34
Liked 137 Times in 51 Posts
|
Re: plastic printing
Quote:
There is a source for small primary bowls for under $150, which I don't know if they are still being manufactured or there is just a large overstock. But no source for big primary bowls that I'm aware of.
__________________
LOCOMOTION Racing Last edited by Myron Piatek; 09-17-2018 at 06:35 PM. |
|
Thread Tools | |
Display Modes | |
|
|