|
|
|
|
06-13-2019, 07:13 PM
|
#1 |
|
Member
Join Date: Nov 2008
Posts: 306
Likes: 3
Liked 19 Times in 17 Posts
|
Turbo 200
New to the 200 metric world for super stocker. Bought a used unit...how much fluid is required for deep pan? Came with a lokar dip stick but not sure if it's accurate. Thanks.
Ed |
|
|
|
06-13-2019, 09:12 PM
|
#2 |
|
Live Reporter
Join Date: Jan 2011
Location: New Bern, NC
Posts: 3,467
Likes: 146
Liked 3,363 Times in 731 Posts
|
Re: Turbo 200
Ed I've always been told 6 3/4 to 7 quarts but I would probably pull the pan with the dipstick in so you can get an accurate measurement. Paul at Turbo Action always recommend the full mark be 5/16 inch below the bottom of the transmission where the pan bolts on.
__________________
James Williamson W200 J/SA. SS/JA |
|
|
|
|
06-14-2019, 02:27 PM
|
#3 |
|
Senior Member
Join Date: Jan 2008
Location: 100th Meridian
Posts: 569
Likes: 116
Liked 280 Times in 139 Posts
|
Re: Turbo 200
Go to turboaction.com,on the left side of the page click on technical tips then click on tip #12.It will give you the info on fluid levels on a M200..gsa612
|
|
|
|
|
06-14-2019, 08:50 PM
|
#4 |
|
Member
Join Date: Nov 2008
Posts: 306
Likes: 3
Liked 19 Times in 17 Posts
|
Re: Turbo 200
Thanks guys.
|
|
|
|
|
06-14-2019, 10:00 PM
|
#5 |
|
Senior Member
Join Date: Jan 2008
Location: 100th Meridian
Posts: 569
Likes: 116
Liked 280 Times in 139 Posts
|
Re: Turbo 200
What does the trans. have for venting,a long hose to the top of the bell?.When I first fill mine I just go a hair above add then get the trans. temp.to about 160 and check it.On mine it comes up to just under full.Proper venting and fluid level is important or you'll have atf all over.Do you know who built the trans?. gsa612
|
|
|
|
|
06-15-2019, 10:43 AM
|
#6 | |
|
Member
Join Date: Nov 2008
Posts: 306
Likes: 3
Liked 19 Times in 17 Posts
|
Re: Turbo 200
Quote:
|
|
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
