Adjustable brake pressure switches

west coast · 09-25-2011, 03:49 PM

I am looking to buy some adjustable brake pressure switches, but GemSenors has a minium order of 10 for what I am looking for in the switch. If any body would also like this switch I will order some I just dont need 10 of them. They look to be $67 each, plus shipping and taxes once I have enough people that want them I would order them. Here are the spec's for the switch
1/8 male pipe
250-1000 psi Repeatability ±15 psi Average Deadband 45 psig (3.10 bar) +12% of setting
Circuit SPDT, three wire common, NO and NC
EPDM Diaphragm which is the best compatibilty for brake fluid
18" wire leads

PM me if interested or have question

Notch1320 · 09-25-2011, 05:47 PM

West Coast,

I bought the exact same switch from Michael Galich who is the Inside Sales Warehouse Mgr. at Geoge B. Allan Co. I beleive I paid $67 thru him and only ordered one.

The pressure adjusts from 250 PSI to 1000 PSI. Part # 209506

800 422-8727

fax 972 241-7126

MichaelG@GeorgeBAllan.com

George B Allan CO
14836 Venture Dr
Farmers Branch, TX 75234

Be sure to tell him I directed you to him and that you are using it in a Stock Eliminator car. He is a race fan who attends events doing photo shoots of cars.

Shoot me your e-mail address and I will send you a picture of the switch installed if you like.

Shawn Allsup

Phillip marvetz · 09-25-2011, 05:56 PM

I have 1 left if your going to be at Mission for the last race.

west coast · 09-25-2011, 11:17 PM

Hi Shawn & Phil
The switch that I am looking for is Part# 209632. The switch 209506 is what I found on this site also after doing some research that switches diaphragh is made out of nitrile which is not compatable with brake fluid. The switch that I have the part # for is campatable with brake fluid. I will try Goerge and see if he can get me less than 10 of them. Thank Shawn will let you know if Goerge was helpful thanks for the contact info.

Phil I take it that 209506 is the part # you have? I dont know if I will be at that last Mission race yet.

Thanks Guys James

Dave Jung · 09-26-2011, 12:17 AM

James,

I have a guy who will sell singles of the pressure switches. Email me, I have his info at work.

dave6888@shaw.ca

09-25-2011, 03:49 PM	#1
west coast Senior Member Join Date: Dec 2008 Location: Rainy Washington Posts: 579 Likes: 4 Liked 131 Times in 51 Posts	Adjustable brake pressure switches I am looking to buy some adjustable brake pressure switches, but GemSenors has a minium order of 10 for what I am looking for in the switch. If any body would also like this switch I will order some I just dont need 10 of them. They look to be $67 each, plus shipping and taxes once I have enough people that want them I would order them. Here are the spec's for the switch 1/8 male pipe 250-1000 psi Repeatability ±15 psi Average Deadband 45 psig (3.10 bar) +12% of setting Circuit SPDT, three wire common, NO and NC EPDM Diaphragm which is the best compatibilty for brake fluid 18" wire leads PM me if interested or have question

09-25-2011, 05:47 PM	#2
Notch1320 Member Join Date: May 2004 Location: Yuba City, CA Posts: 220 Likes: 0 Liked 0 Times in 0 Posts	Re: Adjustable brake pressure switches West Coast, I bought the exact same switch from Michael Galich who is the Inside Sales Warehouse Mgr. at Geoge B. Allan Co. I beleive I paid $67 thru him and only ordered one. The pressure adjusts from 250 PSI to 1000 PSI. Part # 209506 800 422-8727 fax 972 241-7126 MichaelG@GeorgeBAllan.com George B Allan CO 14836 Venture Dr Farmers Branch, TX 75234 Be sure to tell him I directed you to him and that you are using it in a Stock Eliminator car. He is a race fan who attends events doing photo shoots of cars. Shoot me your e-mail address and I will send you a picture of the switch installed if you like. Shawn Allsup __________________ Shawn Allsup K/S 718

09-25-2011, 05:56 PM	#3
Phillip marvetz Senior Member Join Date: Oct 2008 Location: Lynden ,WA Posts: 820 Likes: 0 Liked 3 Times in 3 Posts	Re: Adjustable brake pressure switches I have 1 left if your going to be at Mission for the last race. __________________ 2009 V/SA Record Holder

09-25-2011, 11:17 PM	#4
west coast Senior Member Join Date: Dec 2008 Location: Rainy Washington Posts: 579 Likes: 4 Liked 131 Times in 51 Posts	Re: Adjustable brake pressure switches Hi Shawn & Phil The switch that I am looking for is Part# 209632. The switch 209506 is what I found on this site also after doing some research that switches diaphragh is made out of nitrile which is not compatable with brake fluid. The switch that I have the part # for is campatable with brake fluid. I will try Goerge and see if he can get me less than 10 of them. Thank Shawn will let you know if Goerge was helpful thanks for the contact info. Phil I take it that 209506 is the part # you have? I dont know if I will be at that last Mission race yet. Thanks Guys James

09-26-2011, 12:17 AM	#5
Dave Jung Member Join Date: Oct 2008 Location: Surrey B.C. Posts: 135 Likes: 3 Liked 5 Times in 5 Posts	Re: Adjustable brake pressure switches James, I have a guy who will sell singles of the pressure switches. Email me, I have his info at work. dave6888@shaw.ca __________________ 6535 stk 81 Malibu K/SA