|
|
![]() |
#1 |
Senior Member
Join Date: Dec 2008
Location: Rainy Washington
Posts: 579
Likes: 4
Liked 131 Times in 51 Posts
|
![]()
I am building a back up transmission for my car 1988 Mustang stock eliminator K/SA. I am a newby to youtube but giving it a try. First off I am no expert at anything, I have thick skin so dont be afriad of affending me. Comments welcome, I have learned everything by doing. I have build my stocker from the ground up everything, except when i dont have the tooling to do it like engine machine work like block and cylinder head work. I do everthing cause I enjoy it. Knew nothing about fuel injection when I started on this car. I have learned a lot and still learning. I tune my own car.
So I am documenting this tranny build because all this knowledge is in my head and after a couple of years of not doing it, you forget the small things. I will go over the modification I do, part# and machining parts for rollerising the trust washer. Maybe I convert some stick guys to the dark side LOL <iframe width="560" height="315" src="https://www.youtube.com/embed/D4rkiT10mxc" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>
__________________
James Boyce 6052 K/SA Stock National record holder 2015,2018,2 times in 2022,2023 |
![]() |
![]() |
Liked |
![]() |
#2 |
Senior Member
Join Date: Dec 2008
Location: Rainy Washington
Posts: 579
Likes: 4
Liked 131 Times in 51 Posts
|
![]()
Ok need help on posting a my Youtube video for tranny build. It just post a long text of the embed link thats not a link?
__________________
James Boyce 6052 K/SA Stock National record holder 2015,2018,2 times in 2022,2023 Last edited by west coast; 04-30-2021 at 03:20 PM. |
![]() |
![]() |
Liked |
![]() |
#3 |
Senior Member
Join Date: Nov 2007
Location: Div. 6, Eastern, WA
Posts: 696
Likes: 2,309
Liked 220 Times in 105 Posts
|
![]() Is this what you needed to know?
__________________
Dave Noll, E/FS ,L/SA 6526 |
![]() |
![]() |
Liked |
![]() |
#4 |
Senior Member
Join Date: Dec 2008
Location: Rainy Washington
Posts: 579
Likes: 4
Liked 131 Times in 51 Posts
|
![]()
Yes that is what I was trying to do, had to step away from the computer for a couple of hours to gain my sanity after a couple of hours trying to do it. Thank you Dave. I will send you a PM need to know what I am doing wrong. I have part 2 ready to go.
__________________
James Boyce 6052 K/SA Stock National record holder 2015,2018,2 times in 2022,2023 |
![]() |
![]() |
![]() |
#5 |
Senior Member
Join Date: Nov 2007
Location: Div. 6, Eastern, WA
Posts: 696
Likes: 2,309
Liked 220 Times in 105 Posts
|
![]() This is James 2nd video of a series that he's doing.
__________________
Dave Noll, E/FS ,L/SA 6526 |
![]() |
![]() |
Liked |
![]() |
#6 |
Veteran Member
Join Date: Mar 2002
Location: Miles From Nowhere
Posts: 7,475
Likes: 2,653
Liked 4,578 Times in 1,733 Posts
|
![]()
Good job, James
Is it fair to say this young guy is a real Old School racer? BTW, you just paste the Y/T URL on this forum..This one's easy.
__________________
We are lucky we don't get as much Government as we pay for..... Will Rogers |
![]() |
![]() |
Liked |
![]() |
#7 |
VIP Member
Join Date: Jul 2008
Location: Liberty City [East Texas]
Posts: 1,759
Likes: 5
Liked 99 Times in 60 Posts
|
![]()
James, to me, this embodies the true spirit of hot rodding. I enjoyed the post, good job.
"I am building a backup transmission for my car 1988 Mustang stock eliminator K/SA. I am a newbie to youtube but giving it a try. First off, I am no expert at anything. I have thick skin, so don't be afraid of offending me. Comments welcome. I have learned everything by doing. I have to build my stocker from the ground up everything, except when I don't have the tooling to do it like engine machine work like block and cylinder head work. I do everything cause I enjoy it. I knew nothing about fuel injection when I started on this car. I have learned a lot and still learning. I tune my own car.
__________________
Larry Woodfin 471W |
![]() |
![]() |
Liked |
![]() |
#8 |
Senior Member
Join Date: Nov 2007
Location: Div. 6, Eastern, WA
Posts: 696
Likes: 2,309
Liked 220 Times in 105 Posts
|
![]()
...
__________________
Dave Noll, E/FS ,L/SA 6526 Last edited by Dave Noll; 05-04-2021 at 11:35 PM. Reason: Got ahead of myself |
![]() |
![]() |
![]() |
#9 |
Senior Member
Join Date: Dec 2008
Location: Rainy Washington
Posts: 579
Likes: 4
Liked 131 Times in 51 Posts
|
![]()
[QUOTE=Dragsinger;639815]James, to me, this embodies the true spirit of hot rodding. I enjoyed the post, good job.
Thanks Larry The class racer build I think is the best section. Loved your Super 10 build. Lots of great stuff you posted by doing everthing.
__________________
James Boyce 6052 K/SA Stock National record holder 2015,2018,2 times in 2022,2023 Last edited by west coast; 05-21-2021 at 03:35 PM. Reason: Spelling |
![]() |
![]() |
![]() |
#10 | |
VIP Member
Join Date: Feb 2003
Location: Glendale, Arizona
Posts: 2,993
Likes: 693
Liked 1,460 Times in 545 Posts
|
![]() Quote:
|
|
![]() |
![]() |
Liked |
![]() |
|
|