|
|
07-16-2014, 09:25 AM | #1 |
Senior Member
Join Date: Sep 2006
Location: Bellevue Ohio
Posts: 985
Likes: 0
Liked 12 Times in 9 Posts
|
Bounder, cruise won't work
Have a 2000 Bounder MH diesel pusher, cruise won't set haven't really looked into anything yet just wondering if anyone knows of common issues? BTW the fog lites don't work either....maybe share a fuse? Worst problem I see with these MH's is lack of wiring schematics. Joe
__________________
Joe Buchanan SS/BX 3117 |
07-16-2014, 11:59 AM | #2 |
VIP Member
Join Date: Jun 2006
Posts: 3,371
Likes: 409
Liked 300 Times in 160 Posts
|
Re: Bounder, cruise won't work
This may sound crazy but check the adjustment on the brake light switch under the brake pedal---had a similar issue with another brand MH awhile back and readjusting it (switch) solved the problem---FED 387
|
07-16-2014, 12:59 PM | #3 |
Senior Member
Join Date: Sep 2006
Location: Bellevue Ohio
Posts: 985
Likes: 0
Liked 12 Times in 9 Posts
|
Re: Bounder, cruise won't work
No doesn't sound crazy at all, this veh has air brakes I looked for a brake lite switch inside but see nothing. I'm assuming it has either an electrical switch or an air operated switch but have yet to find it. The brake lites do however seem to work correctly (not staying on) maybe it has a second switch IDK. Not a big deal, but planning a trip to Sturgis and it's quite a haul for us so thought it would be nice to have it working. Joe
__________________
Joe Buchanan SS/BX 3117 |
07-16-2014, 03:17 PM | #4 |
VIP Member
Join Date: Jun 2006
Posts: 3,371
Likes: 409
Liked 300 Times in 160 Posts
|
Re: Bounder, cruise won't work
First look at the vacuum pump area many connectors in that area that over time either corrode or work loose-Second check the brake switch which I already suggested--Third check the stalk and if necessarey pull the steering wheel should be some (5-6) small (fine)wires coiled up in there these tend to break after time the especially with the age of your MH the insulation becomes brittle--- you might have a Ford or a Dana cruise unit---next if you need to replace it cuz your vehicle is obsolete and many parts are no longer available try looking at a I believe it is a "King" cruise control unit they make aftermarket kits you might be able to make work--- Fourth --check all light bulbs any burnt out or not as bright as others might give a "false" reading and make the cruise not want to engage --- Some thoughts to look at!!! FED 387
|
07-16-2014, 03:19 PM | #5 |
VIP Member
Join Date: Jun 2006
Posts: 3,371
Likes: 409
Liked 300 Times in 160 Posts
|
Re: Bounder, cruise won't work
On that vacuum pump you should be able to hear it runnning with the engine OFF & the ignition turned to ON!!!
|
07-16-2014, 03:47 PM | #6 |
Senior Member
Join Date: Sep 2006
Location: Bellevue Ohio
Posts: 985
Likes: 0
Liked 12 Times in 9 Posts
|
Re: Bounder, cruise won't work
OK, wasn't sure what type of cruise system they used on these, never considered a vacuum unit. Thanks. Joe
__________________
Joe Buchanan SS/BX 3117 |
|
|