|
|
12-16-2014, 02:01 PM | #1 |
Member
Join Date: Jul 2008
Location: moreno valley Ca
Posts: 264
Likes: 2
Liked 19 Times in 8 Posts
|
Torque wrench
Where do you guys get the torque wrench that measure down to 5 inch pounds to set pinion pre load.I have been looking online and have not found one will go that low.
__________________
7015 E/SA Sooner Storm |
12-16-2014, 03:16 PM | #2 | |
VIP Member
Join Date: Dec 2007
Location: Woodlawn IL
Posts: 1,093
Likes: 162
Liked 220 Times in 79 Posts
|
Re: Torque wrench
Quote:
I will look and check for sure when I get back to the shop. But I think mine is a KD 2955. Its 1/4 inch drive. So I welded a old 1/4 socket to a socket I use when checking preload. That way I don't have to use several adapters to get there. I dont remember where I got mine as I have had it for 15-20 years but they are available online through many places. Hope this helps Rob |
|
12-16-2014, 03:42 PM | #3 |
VIP Member
Join Date: Dec 2001
Location: Arkansas - In the middle of everything.
Posts: 1,986
Likes: 55
Liked 731 Times in 180 Posts
|
Re: Torque wrench
Get a dial type or a beam type rather than a clicker. You can't get it right with a clicker.
http://www.modernbike.com/product-21...FW4V7AodpF4A-Q http://www.craftsman.com/search=inch...orque%20wrench http://shop.advanceautoparts.com/p/k...955/22988238-P |
12-16-2014, 03:50 PM | #4 |
Member
Join Date: Jul 2008
Location: moreno valley Ca
Posts: 264
Likes: 2
Liked 19 Times in 8 Posts
|
Re: Torque wrench
Ok thanks I was looking for the clicker type,So the dail or beam types or better for checking pinion preload.
__________________
7015 E/SA Sooner Storm |
12-16-2014, 04:26 PM | #5 |
Senior Member
Join Date: Dec 2001
Location: Elysburg, Pa
Posts: 702
Likes: 304
Liked 247 Times in 95 Posts
|
Re: Torque wrench
|
12-16-2014, 04:31 PM | #6 |
VIP Member
Join Date: Dec 2001
Location: Arkansas - In the middle of everything.
Posts: 1,986
Likes: 55
Liked 731 Times in 180 Posts
|
Re: Torque wrench
|
12-16-2014, 03:59 PM | #7 |
Member
Join Date: Sep 2009
Location: Dresden On. Canada
Posts: 460
Likes: 0
Liked 0 Times in 0 Posts
|
Re: Torque wrench
Snap on gte12a dial type ,I've had it a long time pretty well all its used for ...Trevor
|
|
|