1/4 vs 1/8 mile Dragstrip's

[Dave Noll]

Just a question as to what the rest of the country is seeing. Are your tracks switching to 1/8 mile after running 1/4 mile? I get that insurance is cheaper. I will race either one but my overwhelming preference is 1/4 mile.

[FireSale]

Bremerton is one of those airport dragstrips that is long enough to run 1/4 mile but not built for drag racing. It turns downhill at the 1/8 mile mark and is rough at the 1/4. They ran 1/4 until the Handlers Racing Association Presidency changed hands a few years ago. It's car club operated. The current President switched to 1/8 because he felt it was safer. Probably is. Pacific Raceway, on the other hand is a purpose built track and will always be 1/4 mile except for some of those dumb No Prep races. The lanes at Bremerton have filled since switching to 1/8, especially with more .90 and Comp cars showing up. I have run both and find 1/8 a real challenge. A lot happens in a short span of time.

[Jim Kaekel]

Definitely happened in Michigan. US131 Motorsports Park and Mid-Michigan Motorplex used to run 1/4 mile brackets up until a couple of years ago. Personally, I'm not a fan of 1/8 mile.

[Keith 944]

US 13 dragway in Delmar Delaware switched over to 1/8 mile drag racing a couple years back. Motorcycles and street class can still run 1/4 mile. My preference is 1/4

[FireSale]

Any reasons stated from management for the above mentioned changes? Dennis at the Handlers faced a lot of flack over taking Bremerton to 1/8 mile but stuck to his safety rational.
Anyone know how this Street Outlaw/No Prep thing got set up on 1/8?

[Jeff Stout]

Both tracks run 1/8 and 1/4 here in AZ. Depends on promoter. Either one works with me.

[Rory McNeil]

Originally Posted by FireSale

Any reasons stated from management for the above mentioned changes? Dennis at the Handlers faced a lot of flack over taking Bremerton to 1/8 mile but stuck to his safety rational.
Anyone know how this Street Outlaw/No Prep thing got set up on 1/8?

I started racing at Bremerton in 1980, and it was always 1/4 mile until a few years ago. Hell, back in the 70s, they ran Top Fuel dragsters and Nitro Funny Cars there. The track is more than long enough, but for whatever reason, the starting line was moved forward some years ago, and they also installed a "fence" across the track, about 200 feet closer to the finish line, and made a new exit to the return road, essentially reducing the shutdown by that amount. The first few years I raced at Bremerton, the racing surface was closer to the right, and the return road exit was also on the right, No idea why they moved the track to the left, and made the return road on the left as well. Bremerton Raceway is a WW11 Bomber airstrip, than is much wider and longer than most 1/4 mile dragstrips, that for some reason had the racing surface moved around, and shortened, even though the actual paved surface is much longer. I always loved racing at Bremerton, but have not been there since the change to 1/8th mile.
I can see how an 1/8th mile track is obviously cheaper to built, as that much less land is needed, less pavement, guardrail/wall, less timing sensors etc, but changing an already in use, 1/4 mile dragstrip, to 1/8th , ,makes no sense to me.