|
|
08-06-2016, 03:33 PM | #1 |
Senior Member
Join Date: Jun 2008
Location: nhranumbers.com
Posts: 869
Likes: 129
Liked 151 Times in 48 Posts
|
STRANGE 12 bolt housing VS GEARS
I have a new 12 bolt housing from STRANGE.
I was going to change the gears and I have a set of RICHMOND gears. The pinion gear on the new RICHMOND is 3/16 shorter than the gear we took out of the car. The new gear will not fit. Any idea what gives here. I thought all series 4, 12 bolt, gears were the same? Thanks!
__________________
Glen DeMenge 1969 Camaro Stock Eliminator |
08-06-2016, 03:42 PM | #2 |
VIP Member
Join Date: May 2006
Location: Murfreesboro TN
Posts: 4,934
Likes: 1,020
Liked 1,093 Times in 286 Posts
|
Re: STRANGE 12 bolt housing VS GEARS
The pinion gear is 3/16" shorter where?
Which ratio? Are both gear sets Richmond? The same series?
__________________
Alan Roehrich 212A G/S |
08-06-2016, 03:50 PM | #3 |
VIP Member
Join Date: Dec 2002
Location: Lower Dakota territory
Posts: 1,172
Likes: 1,021
Liked 770 Times in 230 Posts
|
Re: STRANGE 12 bolt housing VS GEARS
I've never seen any 12 bolt gears where the pinion was shorter in depth, which is what I take it you're referring to?
Post a pic of the new and old pinion side by side.
__________________
"That'll never work....." |
08-06-2016, 05:12 PM | #4 |
Member
Join Date: Oct 2002
Location: kansas
Posts: 230
Likes: 422
Liked 236 Times in 44 Posts
|
Re: STRANGE 12 bolt housing VS GEARS
does the ring gear work?
i'm betting you have got a set for something other than a 12 bolt. pete |
08-06-2016, 05:18 PM | #5 |
VIP Member
Join Date: Jun 2006
Posts: 3,358
Likes: 358
Liked 282 Times in 152 Posts
|
Re: STRANGE 12 bolt housing VS GEARS
could it be a BOP gear set???
|
08-06-2016, 06:27 PM | #6 |
Senior Member
Join Date: May 2004
Location: Brookfield, CT
Posts: 708
Likes: 13
Liked 322 Times in 68 Posts
|
Re: STRANGE 12 bolt housing VS GEARS
Have a strange 12 bolt in our stocker,never any problems with any brand gears, you probably have wrong gears.12 bolt truck or BOP stuff.
__________________
Lee Valentine 1661 STK |
08-07-2016, 11:49 AM | #7 |
Senior Member
Join Date: Jun 2008
Location: nhranumbers.com
Posts: 869
Likes: 129
Liked 151 Times in 48 Posts
|
Re: STRANGE 12 bolt housing VS GEARS
After looking at it I see the pinion will not pass through the bearing in the case.
new one has the bearing on it.
__________________
Glen DeMenge 1969 Camaro Stock Eliminator |
08-07-2016, 12:40 PM | #8 |
Member
Join Date: Sep 2006
Location: Kilgore TX
Posts: 432
Likes: 5
Liked 70 Times in 38 Posts
|
Re: STRANGE 12 bolt housing VS GEARS
it appears that you simply have the wrong gear set. Maybe boxed wrong or looked up wrong number.
|
08-07-2016, 01:00 PM | #9 |
VIP Member
Join Date: Oct 2013
Location: Gulf Breeze, FL
Posts: 1,655
Likes: 8
Liked 33 Times in 16 Posts
|
Re: STRANGE 12 bolt housing VS GEARS
If we had the number it could easily be solved...we can see the packaging in your image.
Is this it? https://www.summitracing.com/parts/r...27-1/overview/
__________________
Rich Taylor I/SA - 321 Last edited by HandOverFist; 08-07-2016 at 01:10 PM. |
08-07-2016, 01:11 PM | #10 |
VIP Member
Join Date: Apr 2002
Location: Coarsegold, CA
Posts: 1,017
Likes: 57
Liked 321 Times in 101 Posts
|
Re: STRANGE 12 bolt housing VS GEARS
If you think you have a problem just measure from the area that the front pinion bearing mounts to the end of the spline.....
Measure the bearing mount diameters of the front and rear pinion bearing.. Does the companion flange fit the new gear set??????????? Just looking at the pix it just appears that difference is the length of the gear teeth on the pinion caused by a ratio change..... Just my 2 cents.... Bob
__________________
Bob Mulry 7516 STK A & M Motorsports |
|
|