My 63 Plymouth build

Jet Doc · 11-23-2014, 11:20 AM

Here are some pics of my 63 Plymouth that I've been working on. It's mini tubbed, triple adjustable ladder bars with DA coil overs, Dana 4:30, notched K member with DA shocks and a 12pt moly cage. I'm pretty much ready for the drive train and not really sure what I'm going to use? I have a complete 426 11:1 real Max Wedge motor and a 512 short block on hand. Decisions.

Jet Doc · 11-23-2014, 11:30 AM

Trying to upload current pics, says invalid file

jmcarter · 11-23-2014, 12:05 PM

I'm partial to 63 Plymouths....let me know if you need help.

http://classracer.com/classforum/alb...pictureid=2940

Run to Rund · 11-23-2014, 12:12 PM

If you are not going to run Stock class, I would save the Max Wedge long block and use the 512.

Jet Doc · 11-23-2014, 12:34 PM

Further along.

Jet Doc · 11-23-2014, 01:03 PM

one more

Geerhead55 · 11-23-2014, 10:31 PM

Quote:

Originally Posted by Jet Doc

Here are some pics of my 63 Plymouth that I've been working on. It's mini tubbed, triple adjustable ladder bars with DA coil overs, Dana 4:30, notched K member with DA shocks and a 12pt moly cage. I'm pretty much ready for the drive train and not really sure what I'm going to use? I have a complete 426 11:1 real Max Wedge motor and a 512 short block on hand. Decisions.

A 4:30 gear for a Dana 60 is a little hard to find,,,, how'd you locate them? My 4:88s are a little steep for me and 4:56s still won't put it where I want it. There seems to be a gap down to 4:11s among the manufacturers, so I'm keeping my eyes open.
Thanks for any info.
Danny Durham

Run to Rund · 11-24-2014, 11:13 AM

according to the Quick Perf. website
http://www.quickperformance.com/Dana-60-D60_c_79.html

Yukon makes 4.30's

Geerhead55 · 11-25-2014, 12:00 AM

Quote:

Originally Posted by Run to Rund

according to the Quick Perf. website
http://www.quickperformance.com/Dana-60-D60_c_79.html

Yukon makes 4.30's

Thank you, sir,, for the info.
Danny Durham

11-23-2014, 11:20 AM	#1
Jet Doc Junior Member Join Date: Jun 2011 Posts: 6 Likes: 0 Liked 0 Times in 0 Posts	My 63 Plymouth build Here are some pics of my 63 Plymouth that I've been working on. It's mini tubbed, triple adjustable ladder bars with DA coil overs, Dana 4:30, notched K member with DA shocks and a 12pt moly cage. I'm pretty much ready for the drive train and not really sure what I'm going to use? I have a complete 426 11:1 real Max Wedge motor and a 512 short block on hand. Decisions. Attached Thumbnails

11-23-2014, 11:30 AM	#2
Jet Doc Junior Member Join Date: Jun 2011 Posts: 6 Likes: 0 Liked 0 Times in 0 Posts	Re: My 63 Plymouth build Trying to upload current pics, says invalid file

11-23-2014, 12:05 PM	#3
jmcarter VIP Member Join Date: Dec 2008 Location: Richmond Hill GA (and Port Ludlow WA) Posts: 4,296 Likes: 2,383 Liked 3,178 Times in 972 Posts	Re: My 63 Plymouth build I'm partial to 63 Plymouths....let me know if you need help. http://classracer.com/classforum/alb...pictureid=2940 __________________ Jim Carter 2340 Super Stock 2340 SST/2340 Stock Set another place at the table

11-23-2014, 12:12 PM	#4
Run to Rund Senior Member Join Date: Sep 2007 Location: Henderson, NV Posts: 583 Likes: 8 Liked 54 Times in 27 Posts	Re: My 63 Plymouth build If you are not going to run Stock class, I would save the Max Wedge long block and use the 512.

11-23-2014, 12:34 PM	#5
Jet Doc Junior Member Join Date: Jun 2011 Posts: 6 Likes: 0 Liked 0 Times in 0 Posts	Re: My 63 Plymouth build Further along. Attached Thumbnails

11-23-2014, 01:03 PM	#6
Jet Doc Junior Member Join Date: Jun 2011 Posts: 6 Likes: 0 Liked 0 Times in 0 Posts	Re: My 63 Plymouth build one more Attached Thumbnails

11-24-2014, 11:13 AM	#8
Run to Rund Senior Member Join Date: Sep 2007 Location: Henderson, NV Posts: 583 Likes: 8 Liked 54 Times in 27 Posts	Re: My 63 Plymouth build according to the Quick Perf. website http://www.quickperformance.com/Dana-60-D60_c_79.html Yukon makes 4.30's