|
|
07-31-2023, 09:05 AM | #1 |
VIP Member
Join Date: Oct 2002
Location: Greater Boston
Posts: 1,476
Likes: 990
Liked 778 Times in 175 Posts
|
Transbrake issue
I have a 92 Mustang, 302 FI C4 (reverse valve body w/air shifter) in SS. Had trans rebuilt over the winter. Ever since, transbrake isn't working correctly. Voltage was checked, solenoid works, transfluid pressure was checked. First run of the day everything works fine but on subsequent runs, transbrake doesn't hold and I go through the lights. Happened yesterday again at LVD. Anyone ever have this happen? Valve body issue? Thanks for replies.
__________________
Bob Don 128 SS Last edited by Bob Don; 08-01-2023 at 08:16 AM. |
07-31-2023, 04:00 PM | #2 |
VIP Member
Join Date: Feb 2006
Location: Dela-where?
Posts: 2,131
Likes: 1,018
Liked 1,678 Times in 533 Posts
|
Re: Transbrake issue
I had a hipster solenoid roll pin, started backing out, and sometimes it would catch not engage, engage or get stuck. Not sure if your trans brake even has a roll pin in the solenoid but definitely something to check.
__________________
KEITH MAYERS 2 X somebody many X nobody |
Liked |
07-31-2023, 10:43 PM | #3 |
VIP Member
Join Date: Jun 2009
Location: Boulder City, Nevada 89005
Posts: 2,545
Likes: 2,242
Liked 1,886 Times in 580 Posts
|
Re: Transbrake issue
In my SS car I had a similia issue.
Turned out that I had a leg strength issue. I am 75. I had to lower the pressure switch a lot to compensate.
__________________
John Irving 741 Stock 741 Super Stock Last edited by GTX JOHN; 08-01-2023 at 09:31 PM. |
08-01-2023, 10:02 PM | #4 |
Senior Member
Join Date: Sep 2010
Location: Houston,Texas
Posts: 679
Likes: 1,953
Liked 260 Times in 105 Posts
|
Re: Transbrake issue
|
08-02-2023, 11:44 AM | #5 |
Member
Join Date: May 2014
Location: E TN
Posts: 444
Likes: 14
Liked 109 Times in 63 Posts
|
Re: Transbrake issue
Go through the lights, I'm guessing you go forward when on the TB. Does it hold at all or does it roll forward as soon as you take your foot off of the brake? I'd check the wiring first to make sure the hot solenoid isn't showing a fault in the wiring. 2 wire solenoid? Where is it grounded?
|
Liked |
07-31-2023, 10:52 PM | #6 | |
VIP Member
Join Date: Jan 2003
Location: Allentown,PA
Posts: 2,438
Likes: 786
Liked 703 Times in 206 Posts
|
Re: Transbrake issue
Quote:
__________________
Tom Goldman 1500 SG , 1506 STK |
|
Liked |
08-01-2023, 04:06 PM | #7 |
VIP Member
Join Date: Nov 2009
Location: Egg Harbor Township, NJ
Posts: 1,385
Likes: 1,179
Liked 3,580 Times in 433 Posts
|
Re: Transbrake issue
Whose valve body, internal or external trans brake selenoid and does the trans work fine when not using the trans brake? Can you hold it with the foot brake?
|
08-01-2023, 10:00 PM | #8 |
Member
Join Date: Mar 2009
Posts: 405
Likes: 276
Liked 460 Times in 110 Posts
|
Re: Transbrake issue
Also make sure your air bottle has enough C02, might have enough pressure in the bottle first time out but loses air pressure? Maybe an air leak? Consider switching to an electric shift instead of air shift, I did and much happier.
Tim Stickles
__________________
Tim Stickles |
|
|