|
|
![]() |
#1 |
Junior Member
Join Date: Jul 2007
Posts: 92
Likes: 2
Liked 0 Times in 0 Posts
|
![]()
I was told NHRA may now be allowing aftermarket rocker arms (Similar to Harland Sharp Non-Adj) to be used in 428 Stockers, as a replacement ? I’m not finding it in the appendage like the Molnar Rods. Brent Lykins makes a nice non adjustable shaft system I’d like to use if this is indeed correct
|
![]() |
![]() |
![]() |
#2 |
Junior Member
Join Date: Aug 2008
Posts: 36
Likes: 19
Liked 13 Times in 9 Posts
|
![]()
Roller rockers have been legal in stock eliminator for quite some time.
|
![]() |
![]() |
Liked |
![]() |
#3 |
Junior Member
Join Date: Jul 2007
Posts: 92
Likes: 2
Liked 0 Times in 0 Posts
|
![]() |
![]() |
![]() |
![]() |
#4 |
Member
Join Date: Dec 2001
Location: Covina, CA
Posts: 470
Likes: 81
Liked 69 Times in 15 Posts
|
![]()
Detailed specifications are quickly accessible through <http://www.classracerinfo.com/>.
__________________
Chuck Norton |
![]() |
![]() |
![]() |
#5 |
Junior Member
Join Date: Jul 2007
Posts: 92
Likes: 2
Liked 0 Times in 0 Posts
|
![]() |
![]() |
![]() |
![]() |
#6 |
VIP Member
Join Date: May 2006
Location: Murfreesboro TN
Posts: 4,945
Likes: 1,029
Liked 1,117 Times in 294 Posts
|
![]()
Get it in writing from Pat Cvengros, or Dave Ley, but the basic intent of the roller rocker arm rule is that the rocker arm must bolt to the head without modification or machine work. I don't see where the rule specifies the method of adjustment, or that the aftermarket roller rockers must be non adjustable if the factory rockers were non adjustable. So you may not need to buy non adjustable rocker arms. I'd see what is available that I wanted, and then contact Pat and/or Dave.
__________________
Alan Roehrich 212A G/S |
![]() |
![]() |
![]() |
#7 |
VIP Member
Join Date: May 2006
Location: Murfreesboro TN
Posts: 4,945
Likes: 1,029
Liked 1,117 Times in 294 Posts
|
![]()
No problem.
__________________
Alan Roehrich 212A G/S |
![]() |
![]() |
![]() |
|
|