Intake & Carb Recommendation for 481" BBC

66chevron · 09-09-2009, 08:57 PM

I am running a 468" with port matched GM aluminum heads, .712/.712 cam around 274/278 duration. Goes 6 flat @ 3000#. Using the Edelbrock 454R out of the box, Holley 9375 1050 out of the box with a little more jet. Decided on the 9375 because it is annular discharge, supposed to work better than the 8896 with a stop. Have been very satisfied with what I use, but haven't really tried anything else. Good luck.

09-09-2009, 08:57 PM	#13
66chevron Junior Member Join Date: Mar 2005 Posts: 13 Likes: 1 Liked 0 Times in 0 Posts	Re: Intake & Carb Recommendation for 481" BBC I am running a 468" with port matched GM aluminum heads, .712/.712 cam around 274/278 duration. Goes 6 flat @ 3000#. Using the Edelbrock 454R out of the box, Holley 9375 1050 out of the box with a little more jet. Decided on the 9375 because it is annular discharge, supposed to work better than the 8896 with a stop. Have been very satisfied with what I use, but haven't really tried anything else. Good luck.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode