Update E-F/SA Bird Build...

brent flynn · 08-06-2015, 08:21 PM

Well, i'd say its running a tad better than it did last year, with the same setup...only difference is i have short radials vs tall radials i was running last year, with the same cam, gear and trans... my best pass last year, with this setup was 11.59 and it went 11.54s in way worse conditions... i think the trans is a tad faster, and its a tad lighter... and it LOVES the 4.56s, especially 1/8 mile... pulls good up to the 1000' ft mark, then sorta settles, but tach keeps goin up to 6400, at the finish. Im goin to run the 350 trans before i switch gears again, to see if it shows anything at all...

08-06-2015, 08:21 PM	#18
brent flynn Senior Member Join Date: Apr 2011 Location: Middletown, IN Posts: 593 Likes: 0 Liked 0 Times in 0 Posts	Re: Update E-F/SA Bird Build... Well, i'd say its running a tad better than it did last year, with the same setup...only difference is i have short radials vs tall radials i was running last year, with the same cam, gear and trans... my best pass last year, with this setup was 11.59 and it went 11.54s in way worse conditions... i think the trans is a tad faster, and its a tad lighter... and it LOVES the 4.56s, especially 1/8 mile... pulls good up to the 1000' ft mark, then sorta settles, but tach keeps goin up to 6400, at the finish. Im goin to run the 350 trans before i switch gears again, to see if it shows anything at all... __________________ 1968 Bird/TRW 455/Home ported 13's, '70 Qjet,Holley Street Dominator manifold, Comp Solid FT, 10.817/122.30/1.440 Workin' on E/SA combo 3119 E/SA

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode