Dedenbear Lightning Plus Delay Box

[Lenny5160]

Originally Posted by StompNDump

When you say separate timer for the shift, you are referring to an entire different timer box correct?

Yes, you can use some other method of controlling the shift if you really want to use a SLC. Something like these:

https://www.summitracing.com/parts/ded-st1/overview/

https://www.jegs.com/i/Biondo/376/DDI-1068/10002/-1

I'd highly recommend the Biondo box if you go this route, since it can do RPM or time and the cost is equal.

If you are using a MSD Digital 7 or Grid ignition, you can control the shift directly from that too.