brake problem

gmonde · 12-24-2007, 07:55 PM

sounds like a master cylinder problem,try this ,plug all four lines at the calipers(you can do this with plugs for #4 line ,this dead heads the master,(i asume that you have braided lines)if the master is bad you wont be able to get a pedal no matter how much you bleed at the lines,if the pedal is hard,hook up one line at a time to the calipers could be a caliper piston lip seal not holding the piston out to the pad

gmonde

12-24-2007, 07:55 PM	#10
gmonde Senior Member Join Date: Nov 2007 Posts: 615 Likes: 56 Liked 165 Times in 59 Posts	Re: brake problem sounds like a master cylinder problem,try this ,plug all four lines at the calipers(you can do this with plugs for #4 line ,this dead heads the master,(i asume that you have braided lines)if the master is bad you wont be able to get a pedal no matter how much you bleed at the lines,if the pedal is hard,hook up one line at a time to the calipers could be a caliper piston lip seal not holding the piston out to the pad gmonde