|
|
07-27-2018, 05:30 PM
|
#11 |
|
VIP Member
Join Date: Aug 2013
Posts: 1,763
Likes: 1,197
Liked 1,955 Times in 492 Posts
|
Re: 69 Camaro B/S
I would bolt the trans. to the bell on the ground and measure the face of the bell to the end of the input shaft then measure the mounting surface on the block to the pilot bearing. Just to make sure the input shaft isn't bottoming out into the pilot. Looking good keep up the nice work.
__________________
Todd Greene |
|
|
|
|
Threaded Mode