|
04-07-2019, 11:09 PM | #1 |
Junior Member
Join Date: Feb 2002
Location: Ohio
Posts: 43
Likes: 4
Liked 1 Time in 1 Post
|
Mechanical Throttle Stop Adjustment - Question
Does anyone have experience with how much adjustment is needed to start effecting ET? So, today I got some testing done and either I have a issue with the car or I need to adjust T-stop out more to start effecting things... Overview of today: Basically, I made six 1/4 mile runs today between 1pm and 4pm. Three runs were all out (T-stop not hitting carb linkage) and three runs with T-stop adjusted out 5-6 complete turns out after initially touching carb linkage. The problem was the runs at full throttle were SLOWER than when I had T-stop adjusted out 5-6 turns.. Make no sense to me...! LOL
tt3 5 turns out 1.774 12.618/107.45 tt4 0 turns out 1.785 12.682/106.97 tt5 0 turns out 1.782 12.583/107.61 tt6 5 turns out 1.763 12.570/107.43 tt7 0 turns out 1.775 12.601/107.25 tt8 6 turns out 1.770 12.555/107.90 *Carb is a Holley 700 DP. (secondary linkage removed, so just running on 2 barrels)... Thanks! |
|
|