|
|
06-21-2019, 09:43 AM
|
#7 |
|
Live Reporter
Join Date: Oct 2004
Location: Hickory, Ky
Posts: 10,650
Likes: 1,942
Liked 10,769 Times in 2,238 Posts
|
Re: Offset grinding crank ?
The center-line of the crank pin is moved .0065 away from center-line of mains. If stroke on stock crank is 3.483'' instead 3.480'' and the pin is on the high side of tolerance it will make a stroke of 3.493'' grinding it .010'' under to the low side. But usually it takes a .030'' under on the rods to get .013'' stroke. If the index is good why not make it .014'' long?
|
|
|
| Liked |
|
|
Threaded Mode