Stock Valve Job

Woodro Josey · 01-22-2009, 09:07 PM

OK Guys, there is no .250 above or below anymore. Any bowl cut as long as it is done off the center of the guide. Any valve job and any angles.......but absolutely no grinding anywhere. Machine to be done off the center of the guide and NO MOVING THE GUIDES!

Mike Taylor 3601 · 01-22-2009, 09:21 PM

Thank's Woodro for the info plain & simple.
Mike Taylor3601

01-22-2009, 09:07 PM	#1
Woodro Josey Senior Member Join Date: Jul 2007 Posts: 805 Likes: 0 Liked 3 Times in 1 Post	Re: Stock Valve Job OK Guys, there is no .250 above or below anymore. Any bowl cut as long as it is done off the center of the guide. Any valve job and any angles.......but absolutely no grinding anywhere. Machine to be done off the center of the guide and NO MOVING THE GUIDES! __________________ Woodro Josey 2002 STK

01-22-2009, 09:21 PM	#2
Mike Taylor 3601 VIP Member Join Date: Oct 2008 Location: Somerset,Ky Posts: 1,380 Likes: 368 Liked 317 Times in 108 Posts	Re: Stock Valve Job Thank's Woodro for the info plain & simple. Mike Taylor3601

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode