1969 camaro Big Block trans mount???

mannymen · 01-24-2009, 09:14 PM

Not sure this helps anyone. When I switched from my powerglide to a T-400 I had to change trans crossmembers to the T-400 crossmember. The aftermarket NPD crossmember bolted in fine, but the trans mount holes still didn't line up. I then had to cut off the trans mounting flange and move it over at least 1/2 of an inch. Try to get an original crossmember for better alignment.

01-24-2009, 09:14 PM	#1
mannymen Senior Member Join Date: Apr 2003 Posts: 728 Likes: 5 Liked 13 Times in 7 Posts	Re: 1969 camaro Big Block trans mount??? Not sure this helps anyone. When I switched from my powerglide to a T-400 I had to change trans crossmembers to the T-400 crossmember. The aftermarket NPD crossmember bolted in fine, but the trans mount holes still didn't line up. I then had to cut off the trans mounting flange and move it over at least 1/2 of an inch. Try to get an original crossmember for better alignment. __________________ N/A

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode