Best builder of Carter Thermoquads ?

[aspen7709]

Steve Wann is good with TQ's. Angelo Phillips and I have been doing our own based on Steves original blueprint and have had good success.Jack Foshee is also really good with them also.we do away with the metering rod setup and run holley jets and a few other tricks.Right now we are testing to see wether the side inlet or the bottom inlet is better for fuel feed. and we have been using -6 line with a bypass system.Also use a good air cleaner.my company sells a single 4 copy of the fresh air style unit the works killer.

[Bub Whitaker]

Originally Posted by aspen7709

Steve Wann is good with TQ's. Angelo Phillips and I have been doing our own based on Steves original blueprint and have had good success.Jack Foshee is also really good with them also.we do away with the metering rod setup and run holley jets and a few other tricks.Right now we are testing to see wether the side inlet or the bottom inlet is better for fuel feed. and we have been using -6 line with a bypass system.Also use a good air cleaner.my company sells a single 4 copy of the fresh air style unit the works killer.

now were talkin.. sounds like most u guys are doin your own and it sounds like your getting a handle on it. JC need to get with you guys and do his own also... Jim Storms, do you do your own? since you have Stock and Superstock using Thermoquad?

[Jim Storms]

I don't want to say ive Mastard them, but ive done a pretty good job,, learning from Steve Wann, Bill Bushmaker, and a few other's... i guess ill know in about 7 days when i make a pass @ Pamona.... i just built a new one for my stocker.. I have a good back up that Marlin Bogner had done for my superstocker. so i guess if the new don't work it's back to plan B

[Mike Delahanty]

Vince Impastato at Impastato Racing Engines - Clinton Township, MI. His stuff has produced back to back double digit dyno improvements over top 16 qualifying S/S carbs - and significant on track improvements as well.

[Bill Edgeworth]

Jim,
Locally I understand Bill Stewart also builds them although I have not seen him or his car around for ages. I think Mike Cotton told me once that he also builds the odd one on the side.

[Brian Oakes]

Denny Steward does them,as he run's one on his SS car and it a fast one. i know he does them for other people, his # is 717-676-3349, he is located in Port Orange FL.

[rx dealer]

Vince Impastato can be reached at 586-749-0200...Luke Awdish

[JCChildress]

I spoke with Vince for a good while. Hes a super good guy and seems extremely intelligent.

[Bill Howell]

I'll have to agree with Denny Steward. He really helped the driveability of our 460 Mustang with the Thermoquad besides making it faster. And he won't quit until you are satisfied with it.