Super street diapers

[DIAPERMAN]

DRE has a diaper just for that car it fits tight and has heat cloth so headers wont burn it in stock call 217-454-5289

[GRIGGS]

DRE made me one for the front end of a 66 Chevy II. Stef's pan with a hole for steering rod to pass through. Thing fits like a glove. Will be ordering another here in a few weeks for new engine with a dry sump set up. Went through tech and '08 Gators and the inspector called the rest of the inspectors over to look at it. If DRE can put a diaper on my nova, they can probably put one on anything. Customer service second to none.
Mike Griggs.

[sst62plymouth]

Dennis is reat to work with and like Griggs, my mopar had a hole through the pan for steering and it fits like a glove. i bought mine last year and the first pass with it on i broke a rod at the big end and i know for a fact that i still got the car today because of it.

craig

and yes its mandatory if you go 135mph

[Jason Oldfield]

OK, I'm going to voice my opinion here, even if it does put me at risk of being unpopular (oh wait, too late!) EVERYONE should have a diaper on their car. EVERYONE. I could give a crap less about NHRA's oil down fine, or the down time due to the cleanup. All I care about is making sure none of my friends get hurt and/or destroy their stuff.

After a 2 year rebuilding project, and a completely fresh motor, I finally got the car out about a month ago. 3 weeks ago, I was at Atco for the $25K bracket races they had there, and here's what happened first round on Saturday at the starting line:



As I mentioned above, the motor was fresh. All the hardware was replaced (rings, bearings, fasteners, etc.), new pistons, cam, and valvesprings, and the rods and crank were magnafluxed to ensure they were still good. This was pass number 8, and from what I can tell, it appears that a brand new ARP rod bolt broke (I'm not blaming ARP, stuff happens, but it is disappointing to have what is supposed to be the highest quality component of its kind break after being professionally installed by a very reputable engine builder.)

The car wasn't running more than 5 seconds from the first faint sign of something going wrong. By the time I had unbuckled and climbed out of the car (30 seconds maximum), there was literally a lake of oil and water emanating from underneath the car (they were down for at least 20 minutes cleaning the mess up, and I didn't even go anywhere!). If this had decided to break at the top end rather than on the starting line, I cringe to think of the results.

Deservedly, I got a little lecture from Tom Stalba for not having a diaper on the car. The REALLY stupid thing is that I actually own a diaper! I just didn't put it on the car because it is a one-size fits all diaper, and it was a pain in the ***** to put on, not to mention that it was big enough to fit a 900 cid big block, let alone my 383 cid small block. Regardless, for me to own a diaper and not have it the car was stupid with a capital 'S'.

My car won't be back out again without a diaper or a belly pan, and for the love of God, all of you, please put a diaper or belly pan on your cars too. For about $200 you can have DRE build you a custom diaper for your car, and that is just such cheap insurance considering amount of money we have tied up in these things (not to mention the emotional investment as well).

Soapbox mode off.

[Dave Steltz]

Jason, sorry about your crappy luck, but these things do happen and sometimes ***** breaks, even when its new (same thing happened to me once...)..

And well said, if you can fit one in your car, put one on, it could save your life...

[DIAPERMAN]

Jason call me lets get one built,I have lots of pics like yours just luckily they had a DRE diaper on and the good news is they cleaned the diaper up and reused it.Also if you tear a DRE diaper or burn a strap we fix it for free you just pay shipping cost..P.S. KEEP YOUR MESS IN YOUR DIAPER AND NOT ON THE TRACK !!

[progasser1]

I'd like to throw in my two cents here, if I could. Jason Oldfield is my neighbor and friend. I'm a former drag bike racer, so I understand drag racing and safety issues related to it. Jason was kind enough to allow me to help (hang around is more precise) in his two year rebuild. He spared no expense and cut no corners. Like any of us, he expected no problems with all the new equipment on his car, so it came as a shock when he texted me from Atco about his engine failure. After he got back, and we had a chance to discuss the whole incident, Jason realized just how lucky (!!!!) he was. When you think that this could have happened on the top end, and he might have gone on his head. you realize what inexpensive insurance a diaper is. What I want to know (I guess I'm directing this to DRE), is when can one be made up for bikes? Don't forget, they have the reciprocating mass moving up and down under the rider. In the meantime, I'm grateful for these type of safety products, and that my friend and neighbor, Jason will be around to race another day. Thanks for the time.

Paul Cuff

[mcaruso]

Originally Posted by Jason Oldfield

....Is that a K&N oil filter?

[Jason Oldfield]

Originally Posted by mcaruso

....Is that a K&N oil filter?

It is. Why do you ask?

[mcaruso]

Originally Posted by Jason Oldfield

It is. Why do you ask?

just being a wiseass, guess i'm not that good @ it?!