'66 Dodge D-Dart at Mecum auction

[Paul Ceasrine]

D-Dart Contributors,
I knew I could stir up the pot a little more. Very good pick-up on the
1966 Comet (Jim R). But, (McCormack Mercury) home of the semi-famous 'Billy Lagana', a 65' Comet A/FX racer, out of Mt. Kisco, New York had one. Probably not a production line car. Not sure if it was a factory installed special order, or dealer installed option. But it was a 289/271HP car. It was running in C/S in 67' (when classes were bumped up one notch). Same thing, 13.80's @100 MPH.....
Alex, Those "Auburn'' clutches. Were like a box of 'Dunkin Donuts'. Good for a dozen only. (12 holeshots only). How would you like to find an "Inland Shifter' and an 'Auburn' clutch package under the Christmas Tree. Mother Mopar did make some bad mistakes....
Paul

[bill dedman]

I need to know (just for my own satisfaction) what kind of shifter was OEM on a 1971 Demon 340 car.

I purchased the complete engine and drivetrain (340, aluminum bell housing, OEM flywheel, clutch, cast iron 4-speed with a 2.39 or 2.49 1st gear (I can't remember which, but it was not a 2.66, to my surprise, ) driveshaft and an 8.75," 3.91 Sure Grip with 13,000 miles on it (in early 1972) out of a wrecked car (rolled), with the shifter still attached to the transmission.... for $500 1972 dollars (that would be $2,560.00, today.)

Bolted it ALL (including the driveshaft, without modification; go figure.... 2"-different wheelbase, but the driveshaft fit, perfectly) into a '64 Valiant V-200, 2 door sedan.

After putting a 3,000-pound Hayes pressure plate (with the centrifugal weights removed.) I raced that car for years, and never missed a gear... and I never EVER lifted, to shift.

I am really ignorant about shifters, and afrer hearing all the verbiage about Inland shifters, I would love to know what I had. I could power-shift that car at 6-grand, all day long; no problem... like a VW Beetle!


The shifter was the original one, and I'd like to know which one it was; Inland, or Hurst.

All I remember about the way it looked was that it had a curve in the shifter to accommodate a bench seat, and, it had a white plastic ball on top, with the shift pattern etched into it..

Anybody know what shifter I had???? I don't remember seeing the word, "Hurst" on the shift lever; in fact, I think it was round, not flat.

Any information will be appreciated!

[ddartdude]

Bill,
It have to have been a Hurst shifter. If it was an Inland shifter, chances are that you would have ripped the handle off of the shifter mechanism while power shifting. It would have landed in the back seat. I think they only used it in 1966 on both the A and B-Bodies.
Alan

[dart4forte]

Originally Posted by ddartdude

Bill,
It have to have been a Hurst shifter. If it was an Inland shifter, chances are that you would have ripped the handle off of the shifter mechanism while power shifting. It would have landed in the back seat. I think they only used it in 1966 on both the A and B-Bodies.
Alan

Inland used through 68. 69 they changed back to Hurst