|
|
![]() |
#1 | |
Senior Member
Join Date: Jul 2007
Location: Nothern IL
Posts: 596
Likes: 1
Liked 1 Time in 1 Post
|
![]() Quote:
The Dually was the most stable and the most expensive to operate. So the minimum I would recomend I would be a 3/4 ton ( a camper special if you can find one)
__________________
Bill Baer 3391 SC, 339B SC, QR Last edited by Bill Baer; 08-20-2010 at 04:55 PM. |
|
![]() |
![]() |
![]() |
#2 |
Junior Member
Join Date: May 2005
Location: Jupiter, FL
Posts: 59
Likes: 0
Liked 0 Times in 0 Posts
|
![]()
would it be possible and safe to tow a 24 foot enclosed trailer with a F150? like a supercrew or something? they are just so much cheaper than f250's.
|
![]() |
![]() |
![]() |
#3 |
Member
Join Date: Mar 2009
Location: Woodinville, WA
Posts: 401
Likes: 0
Liked 0 Times in 0 Posts
|
![]()
I wouldn't even consider it. It has more to do with weight, but I tow a 28' enclosed trailer with a GMC2500HD Diesel and it's the smallest truck I would use. Should've gotten the 3500 dually...
__________________
Chris Williams 6304 SC, TD, ET |
![]() |
![]() |
![]() |
#4 |
Junior Member
Join Date: May 2005
Location: Jupiter, FL
Posts: 59
Likes: 0
Liked 0 Times in 0 Posts
|
![]()
Do you its possible for me to find a pretty good decent 250 or 2500 for $15 to 17$k?
most of the one's i see i can afford have 100,000 miles on them is that alright? |
![]() |
![]() |
![]() |
#5 |
Junior Member
Join Date: May 2005
Location: Jupiter, FL
Posts: 59
Likes: 0
Liked 0 Times in 0 Posts
|
![]()
Is it bad to get a gas motor in a 250 or 2500 ?
|
![]() |
![]() |
![]() |
#6 |
VIP Member
Join Date: Jun 2006
Posts: 3,423
Likes: 542
Liked 333 Times in 180 Posts
|
![]()
100 thou on a 7.3 ford or a Cummings is nothing these engines will go 300thou easily if they have been/are taken care of STAY AWAY from the Ford 6.0 or 6.4 NOTHING BUT EXPENSIVE MAJOR PROBLEMS!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! a V10 gas motor in a Ford is a good engine 5.4 is underpowered not enuf HP /torque there to move that weight-late model Dodge with a Hemi not too sure about most guys run the Cummins " The Duramax is a good engine but hard to find and pretty pricey if you find a truck with one in it-Its all about do you want to control the trailer or do ya want the trailer to control you"---You can use a 1/2 ton but it is not advisable brakes and suspension just cannot handle the load safely--Comp
|
![]() |
![]() |
![]() |
#7 |
Junior Member
Join Date: May 2005
Location: Jupiter, FL
Posts: 59
Likes: 0
Liked 0 Times in 0 Posts
|
![]()
What about the 250's or 2500's with a V8 Gas motor? finding the used v10's are not easy lol. what about the v6 cummins diesel's?
|
![]() |
![]() |
![]() |
#8 |
VIP Member
Join Date: Feb 2006
Location: Cucamonga, CA
Posts: 1,522
Likes: 162
Liked 229 Times in 99 Posts
|
![]()
I have the 2500 HD with the 8.1 L motor. It gets 11 mpg around town and 9 towing. I should have bought the diesel.
__________________
Floyd Staggs 787 SST |
![]() |
![]() |
![]() |
#9 |
Junior Member
Join Date: Aug 2009
Posts: 7
Likes: 0
Liked 0 Times in 0 Posts
|
![]()
I have an 04 Ford FX4 Screw with 18" wheels and it is only rated to pull an 8500# trailer. I believe it has the 2nd highest towing capability of all the F150s. Not a problem with my open trailer, +6000# loaded but sure throws a damper into getting an enclosed. Mind you that new 5.4 pulls like crazy, never down on power and I have no problem with brakes etc but do have a good controller and equalizer hitch. Have yet to use the bars or anti-sway link with this set-up
|
![]() |
![]() |
![]() |
#10 |
VIP Member
Join Date: Feb 2006
Location: Cucamonga, CA
Posts: 1,522
Likes: 162
Liked 229 Times in 99 Posts
|
![]()
Possible, yes. Safe, that's the question.With a 1/2 ton you will get pushed around and you won't feel all that stable. I used to tow with a 1/2 ton till I had to panic stop once. Scared the crap oughta me. Went right down on Monday and bought a 2500 HD. It's my daily driver, a little more expensive to drive, but I feel a lot safer.
__________________
Floyd Staggs 787 SST |
![]() |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|