HOME FORUM RULES CONTACT
     
   
   

Go Back   CLASS RACER FORUM > Class Racer Forums > .90 Heads Up Class Racing Tech

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 09-01-2010, 04:04 PM   #4
Mike Pearson
VIP Member
 
Mike Pearson's Avatar
 
Join Date: Mar 2007
Posts: 2,462
Likes: 620
Liked 1,948 Times in 589 Posts
Default Re: New Ladder Bars / Afco Dbl Adj Coilovers HELP!

Ladder bars uaually only work in one position. The bar must have a downward angle in relationship to the rockerpanel on the car. Put a protractor on the rocker panel and check the angle then put the protractor on the lower bar of the ladder bar. It should be about 2 degrees down from the rocker. start there with a loose shock setting. Good track tight shock setting bad track loose shock setting. I rarely adjust anything on the back of my car. the bars should not need any preload. The rear must be perfectly square in the car. You will need to check this closely. If the rear is not square it will act badly. Good Luck!!
__________________
Mike Pearson 2485 SS
Mike Pearson is offline   Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:37 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.