Oil pressure problems

SST159 · 05-29-2007, 05:37 PM

Dave,
Thanks for the response.
I did check the pickup clearance and it is within the correct range however I learned today that the Melling pickup I am using may not be far enough back in the pan as needed. I am using restrictors and I am using a Melling race pump that is the anitcavitating +10% volume.
My next step is to try a Moroso pump and pickup package that they match to the exact pan I use. The Moroso pickup is a bit different from the Melling.

Drew
S/ST 159

05-29-2007, 05:37 PM	#1
SST159 Member Join Date: Jul 2005 Posts: 315 Likes: 5 Liked 20 Times in 16 Posts	Dave, Thanks for the response. I did check the pickup clearance and it is within the correct range however I learned today that the Melling pickup I am using may not be far enough back in the pan as needed. I am using restrictors and I am using a Melling race pump that is the anitcavitating +10% volume. My next step is to try a Moroso pump and pickup package that they match to the exact pan I use. The Moroso pickup is a bit different from the Melling. Drew S/ST 159 __________________ Drew Wonderly SST 159

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode