|
|
|
|
03-07-2012, 07:51 PM
|
#1 |
|
Member
Join Date: Oct 2011
Posts: 125
Likes: 47
Liked 21 Times in 9 Posts
|
Re: carb ?
Gotta agree with fuel getting past the needle andseat assembly. I don't
beleive that it is a issue to worry about. |
|
|
|
03-08-2012, 10:15 AM
|
#2 |
|
VIP Member
Join Date: Feb 2006
Location: Dela-where?
Posts: 2,195
Likes: 1,163
Liked 1,885 Times in 578 Posts
|
Re: carb ?
thanks guys, any way to check this, or a remedy, or just replace needle and seat?
__________________
KEITH MAYERS 2-1/2 X somebody Still many X nobody |
|
|
|
|
03-08-2012, 01:06 PM
|
#3 |
|
Senior Member
Join Date: Sep 2002
Posts: 502
Likes: 5
Liked 10 Times in 7 Posts
|
Re: carb ?
Also check the gaskets behind the power valve/blocks
Rick
__________________
Rick Bailey 3439 SC |
|
|
|
|
03-08-2012, 03:17 PM
|
#4 |
|
Member
Join Date: Oct 2011
Posts: 125
Likes: 47
Liked 21 Times in 9 Posts
|
Re: carb ?
Keith just change the needle assembly and see what it does
|
|
|
|
|
03-09-2012, 10:03 PM
|
#5 |
|
Senior Member
Join Date: Sep 2002
Posts: 502
Likes: 5
Liked 10 Times in 7 Posts
|
Re: carb ?
So ??????
__________________
Rick Bailey 3439 SC |
|
|
|
|
03-11-2012, 04:36 PM
|
#6 |
|
Member
Join Date: Oct 2003
Posts: 271
Likes: 54
Liked 0 Times in 0 Posts
|
Re: carb ?
Make sure the Float is set properly
Make sure the Needle & Seat are in good / usable condition Make sure the Seat Is Tight (yes, I have seen these loosen & start to back themselves out) Verify Proper Fuel Pressure
__________________
Larry Fulton |
|
|
|
|
03-12-2012, 12:09 AM
|
#7 |
|
Junior Member
Join Date: Nov 2008
Location: Cascade, CO
Posts: 48
Likes: 22
Liked 7 Times in 5 Posts
|
Re: carb ?
Is it really smoke?? Could it be fuel vapor coming back up from an open intake valve?
|
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
